Yash,
Have you checked how you have the metrics set up in the Entry & Approval defaults page that I described in my post earlier today?
(It appears below this as you have replied to yourself on your second more detailed posting!)
Check that the KPIs with automated load ie KPI1 to KPI5 do not appear in the right hand Selected Metrics box.
My suspicion is that you have copied all the metrics over from the left hand field into the right hand field so that when the Load PAS model button is pressed E&A deletes the existing data for all the metrics in that right hand field ie KPI1 through to KPI10 and then loads the data you have provided for KPI6 to KPI10. E&A is expecting you to provide data via E&A for KPI1 to KPI5.
Only those metrics that you wish to load via E&A should appear in the right hand field i.e. KPI6 to KPI10. It is very normal to load the Actual for a KPI via automated load and for the Target to be loaded via E&A.
The view above is from SSM 10 but 7.5 is the same.
Regards
Colin Cooper